Product introduction of Class B (Type 1) surge arrester:
This series power surge protective device is designed according to IEC standard and GB standard.
35mm rail mounting type, and applying in first-class in power supply system,usually installted at
LPZOB~LPZO1(Class B or level I)
This series power surge protective device has High current delivery capacity, and the maximum
discharge current can up to 120KA. The core element of the modular SPD is Spark Gap device or MOV.
1, High discharge capacity
2, Low voltage protection level
3, High speed response
4, Operating state indicator
5, Inner over-thermal breaker
6, Inner circuit over-current
7, Easy for mounting ,apply in IT/TT/TN system
8, Remote control interface as requested
Technical Data:
Model Nr
|
3-phase
|
TS-385B25
|
TS-385B20
|
TS-385B15
|
TS-385M80
|
TS-385M60
|
Single-phase
|
TS-385B25/2
|
TS-385B20/2
|
TS-385B15/2
|
TS-385M80/2
|
TS-385M60/2
|
Nominal voltage (Uc)
|
385 VAC
|
385 VAC
|
385VAC
|
AC 385V
|
385VAC
|
Voltage protection level (Up)
|
≤ 1.2 KV
|
≤ 1.0 KV
|
≤ 1.0 KV
|
≤ 2.8KV
|
≤ 2.3 KV
|
Iimp (10/350)
|
25
|
20
|
15
|
/
|
/
|
Nominal discharge current (In)
8/20μS
|
100 KA
|
80 KA
|
60 KA
|
80 KA
|
60 KA
|
Max.discharge current (Imax)
8/20μS
|
120 KA
|
100 KA
|
80 KA
|
120 KA
|
100 KA
|
Response time (ta)
|
≤ 25 ns
|
Max.backup fuse
|
63 A or TS-FB-I
|
Connector
|
parallel
|
Installation
|
35mm standard rail
|
Degree of protection
|
IP20
|
Cross-section installation
|
Max.:≥10mm2(L,N)Max.:≥16mm2(PE)
|
Green or facult indicator
|
yes/
|
Enclosure material
|
PBT
|
Dimension
|
144x63x89mm (4 ,modulars)
|
Standards
|
IEC 61643-1:2005,GB18802-2002,GB503432004
|
In stallation place
|
Class B/TYPE 1
|
Note: For general technical specification, we can make as customers' requestment, say In,Un,Uc !